![]() Make sure that the correct driver for your audio interface is properly installed and the device is being recognized by your computer.Make sure TRAKTOR PRO 3 is installed and activated on your computer.In this example, we are using a Rane SL 4 audio interface. The article explains a basic setup with two Timecode-controlled Decks. Note: This still requires the use of TRAKTOR SCRATCH Timecode media and will not work with any Timecodes from 3rd-party manufacturers. TRAKTOR PRO 3 introduces the Scratch for All feature - it now supports any audio device for Timecode control, provided the required audio inputs (PHONO for Timecode vinyl / LINE for Timecode CD) are offered. You are now ready to use Phase and Mixfader! You can now load tracks and start playing.This article explains how to set up TRAKTOR PRO 3 to control playback via Timecode from an external turntable or CD player. ![]() Take the Remotes out of the Receiver, put them on your turntables and wait for the calibration to complete (allow the LEDs to turn solid).ħ. Once your sound card is connected to your device, a pop up window will appear allowing you to select the “Serato Timecode Signal” and adjust the settings.Ħ. Connect your sound card to your device using the USB/Lightning adapter.ĥ. Launch the Mixfader DJ App and connect Mixfader to your device via Bluetooth.Ĥ. Connect your speakers or headphones to your sound card output.ģ. Connect the audio outputs of your Phase to the audio inputs of your sound card.Ģ. A Device (smartphone or tablet) with Mixfader DJ Appġ.A sound card with audio inputs & outputs.Make sure the Traktor signal is selected in Phase Manager’s settings (“Configuration” menu).You are now ready to use Phase with your Traktor Kontrol Z2 and Traktor Pro! Spin your turntables: you should see the perfect calibration circle on your Traktor decks.ĥ. Take the Remotes out of the Receiver, put them on your turntables and wait for the calibration to complete (allow the LED turns solid).Ĥ. Set the PH/LN switch on “LN”, then click the Traktor button next to the PH/LN switch to enable DVS mode.ģ. Connect your Traktor Kontrol Z2 to your laptop with its USB cable.Ģb. Power your Phase via USB or any 5V power supply to turn it on, and plug the RCA cables from the Phase outputs to the “Line” inputs of your Z2 mixer.Ģa. Native Instruments Traktor Kontrol Z2 mixerġ. To manually disable it, open Traktor's preferences and in the "Global settings" menu, uncheck the "Enable deck header warning" box (in the middle of the window). Please note that the “calibration failed” message is just a display misinformation.Make sure the Audio 6 is selected in the Traktor “audio setup” tab.Make sure the Traktor signal is selected in Phase Manager’s “Configuration” tab. ![]() You are now ready to use Phase with your Traktor Audio 6 and Traktor Pro! Spin your turntables: you should see the perfect calibration circle on your Traktor decks.Ħ. Open the Traktor Audio 6 Control Panel and make sure the “Input sens” is set on the “Line” signal.ĥ. ![]() Connect the Traktor Audio 6 to your laptop with its USB cable.ģ. Then plug the RCA cable from the A and B outputs of your Traktor Audio 6 into the “Line” inputs of your mixer.Ģ. Power your Phase via USB or any 5V power supply to turn it on, and plug the RCA cables from the Phase outputs to the A and B inputs of your Traktor Audio 6 interface. Native Instruments Traktor Scratch Audio 6 DVS interfaceġ. You are now ready to use Phase with your DJM-900NXS2 mixer and Rekordbox! Take the Remotes out of the Receiver, put them on your turntables and wait for the calibration to complete (allow the LEDs to turn solid).ĥ. Make sure to select the audio routing according to the mixer decks you are using (1&2, or 2&3), and that the virtual decks are set on “Relative” mode.Ĥ. Select “CDJs” instead of “Turntables” in the control hardware tab of the DVS settings.ģc. Go to the DVS tab in the Rekordbox settings, and make sure the DVS function is activated. You should also double check the same settings apply to the input channels you are using in the Rekordbox “Input Channels” setting.ģb. Then, open the setting utility and set the inputs you are using to “Control Tone Line”. Open Rekordbox, go to the Audio Settings and select “DJM900-NXS2” in the “Audio Interface Selector”. Plug the USB from your DJM-900NXS2 mixer to your laptop, and switch the Deck source selector on USB (A or B) to enable DVS Mode.ģa. Power your Phase via USB or any 5V power supply to turn it on, and plug the RCA cables from the Phase outputs to the Line inputs (1&2 or 2&3 depending on your preference) of your DJM-900NXS2 mixer.Ģ. Native Instruments Traktor Kontrol Z2 mixerġ.Native Instruments Traktor Scratch Audio 6 DVS interface.Pioneer DJM-900NXS2 mixer & Rekordbox DJ.DVS interface and Serato DJ Pro USB Integration (HID mode).Click on the DJ equipment you use below to see the corresponding illustrated setup guide:
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |